Self test guide of Honda diagnostic system HDS HIM

HDS HIM diagnostic tool is affordable and powerful diagnostic tool for Honda vehicles from 1992-2016 year. Double pcb HDS HIM Honda Scanner not only support for can bus system also can ecu programming. Do you know how to check if honda him diagnostic system is good working?


HDS HIM 3.102.004 For Honda HDS HIM Diagnose Scanner HDS HIM Double PCB

Here obd2cartool.com will share you how to check if your Honda HDS HIM diagnostic tool works good or not? So you need have self test on Honda HIM Honda diagnostic system.


Here julie will make you step by step guide to show you how to do self test of honda hds him scanner.


1 Attach the DLC loopback connector to be the end of the vehicle DLC cable on the Honda HIM diagnostic tool

2 Attach the RS232 loopback connector (part of your PGM Tester equipment)) on the HIM


3 Connect the PGM Tester Adapter to the POWER socket on Honda HDS HIM device


4 The green LED flashes for 5 seconds


5 The green LED continues to flash and the yellow LED glows steadily, Press Enter button the HIM


6 The green, yellow, red LEDs flash alternately for 15 seconds


7 The green and yellow LED flash alternately.


8 Disconnect the DLC loopback connector, then press the Enter button


9 The green, yellow and red LEDs flash alternately for 15 seconds


10 When Honda HIM self test is complete, and the HIM hardware is confirmed OK, then green LED glows steadily.


Job’s done.


For more details information, welcome to Add my Whatsapp (+86 13537734676) or Skype (great2obd) if you have, Your Private Secretary in Car Repair Area! 16 Hours Online at your Service!


Julie Xiong
Email : obd2cartool@hotmail.com
Skype : great2obd
Whatsapp : 0086 135 3773 4676
Website : www.obd2cartool.com